Burris Company Inc.

Designed machined and assembled in Greeley Colorado the Burris XTR III line of riflescopes featuring fresh reticle designs and enhanced field-of-view. Inspired by tactical and competition shooting precision and reliability are at the core of the XTR III line of optics. Available in a 3.3-18x50mm and 5.5-30x56mm both models are built with a 34mm body tube for increased strength and extended adjustment range. Elevation adjustments up to 120 MOA on the 3.3-18X50mm will take the 6.5 Creedmoor past one mile. Expanded side parallax adjustment on both models allows fine-tuning focus at shorter distances. The SCR MOA reticle increases precision for long-range competition and is now in use on several Burris riflescopes and spotting scopes in both illuminated and non-illuminated models. In illuminated models the extended illuminated center area lets you confidently engage targets in low light and shadows. In non-illuminated models the fine details are sharp enough for close in focus in virtually all lighting conditions. - MOA-based proprietary Burris design increases precision for long-range competition without adding clutter or distraction - Design increases speed and precision for wind hold-off range estimation and impact measurement - 1-MOA holdover lines - 1/2-MOA and 1-MOA windage hold-off lines for precision - 1/4-MOA ranging brackets on the crosshairs at the top left and right extremes - Proprietary reticle - Extended illumination area lets you engage targets at long distance even in low light (Veracity scope is not illuminated). - SCR stands for special competition reticle - Front focal plane design means trajectory compensation and wind hold-off references are accurate at any magnification